[. . . ] [. . . ] Highlight your chosen source Analogue or Digital and press the encoder again to confirm your selection. Changing Direct Out Source: The channel Direct Out may be sourced with either PRE or POST options (POST implies the source is fed through that channels High Pass & Low Pass filters) as follows: 1. From the main menu Select , , Inputs menu, scroll down to the Direct Out Pre/Post 2. Highlight your chosen source Pre Filter, or Post Filter, and press the encoder again to confirm your selection Swapping Direct Out/Bus Out destinations: The Channel Direct Out / Bus Out may be , , swapped to allow bus outputs to be routed to the option slot. Nominally the direct outputs from the channels are routed to the option slot and the bus outputs are routed to the analogue bus outputs. [. . . ] [. . . ]